The use of plastic evaporative cooling pads in climate control systems is both durable and efficient.

Plastic evaporative cooling pad is a kind of cooling and humidifying equipment widely used in agriculture, industry and animal husbandry.

1. Basic overview
Plastic cooling pad is mainly made of raw plastic injection molding production, with green, safe, energy saving, environmental protection and economic characteristics. It is usually designed as a honeycomb structure, which facilitates the uniform distribution and rapid evaporation of water, thus increasing the cooling effect.
2. Working principle
The working principle of the cooling pad is based on the physical phenomenon of heat absorption by water evaporation. When the water is evenly sprayed on the surface of the cooling pad, when the hot air from the outside passes through the wet curtain, the heat in the air is absorbed by the water, and at the same time, part of the water evaporates into water vapor, this evaporation process needs to absorb a lot of heat, thus significantly reducing the temperature of the air. In addition, the cooling pad can also increase the humidity of the air and improve the indoor environment.

3. Advantages
Water corrosion resistance, no mildew and insect peck resistance: the cooling pad is not susceptible to water corrosion, mildew and insect peck due to its material characteristics, so the service life is long and the maintenance cost is low.
Anti-ultraviolet radiation and anti-weathering: the plastic cooling pad has good anti-ultraviolet radiation and anti-weathering ability, is not easy to deform and bend, and does not collapse, effectively overcoming such problems that are easy to appear in paper cooling pads.
Good corrosion resistance: disinfectants can be added as needed to meet the needs of environmental health.
Easy to clean: plastic cooling pad can be cleaned directly with water gun, will not cause damage, and can maintain good ventilation effect after cleaning.
Longer cooling efficiency: The mesh structure of the plastic cooling pad speeds up the diffusion of water, and the natural evaporation rate of the surface humidity increases, so the cooling efficiency is more lasting.
Green and environmental protection: The composition of the plastic cooling pad does not contain allergenic substances, which meets the requirements of green and environmental protection.
4. Application field
Plastic cooling pads are widely used in poultry breeding, animal husbandry, greenhouse planting, horticultural flower planting and industrial production. In these fields, plastic wet curtains can effectively reduce the indoor temperature, increase the air humidity, provide good environmental conditions for the growth of plants and animals, but also provide a more comfortable working environment for workers.

5. Use precautions
When installing a plastic wet curtain, ensure that it is used in conjunction with a negative pressure fan or fan system to create a continuous airflow cycle.
Periodically check that the sprinkler system of the cooling pad is working properly to ensure that the water is evenly sprayed on the surface of the cooling pad.
Clean the cooling pad regularly to remove dust and impurities and maintain good ventilation.
According to the actual need to adjust the cooling pad water spray amount and wind speed to achieve the best cooling effect.
In short, the plastic evaporative cooling pad is a kind of high efficiency, energy saving and environmental protection cooling and humidifying equipment, which has a wide range of application prospects in many fields.